=============================================================================
             Application Software for Sony IC Recorder                       
                Digital Voice Editor Version 3.0.00                          
                     for Windows XP/2000                                     
=============================================================================

Before using the Digital Voice Editor Software, be sure to read this document.
(From hereafter, "Digital Voice Editor" will refer to this latest software 
version unless specified otherwise.)
It contains recently updated information including changes and additions to 
the operating instructions.

[Notice for using the Digital Voice Editor software]
-Notes on installing the software
Close all Windows programs before installing the software. Installing the 
software while other programs are running may result in installation failures. 
In particular, be sure to close any virus checking software as they can cause 
heavy system loads.

Do not connect the IC recorder before installing the software. Be sure to 
install "Digital Voice Editor" before connecting the recorder's USB cable.

When installing or uninstalling the software on the Windows 2000 
Professional, make sure to log on Windows as the user name of 
"Administrator." In case you have logged on as a different user name, log 
off and log on Windows again as "Administrator" and then install the 
software.
To change the log on user name
1. Select [Shut Down] from the [Start] menu.
2. In the [Shut Down Windows] window, select [Log off[User Name]] and then 
   click [OK].
3. Input "Administrator" in the User name box and the password, if 
   specified, in the Password box and then click [OK].

When installing or uninstalling the software on the Windows XP Media Center 
Edition 2005 / Windows XP Media Center Edition 2004 / Windows XP Media Center 
Edition / Windows XP Professional / Windows XP Home Edition, make sure to log 
on Windows as the user name belonging to the group of the "Computer 
administrator"* user account.
(*To find if the user name belongs to the group of the "Computer 
administrator" user account, open the [User Accounts] window from the 
[Control Panel] and refer to the section beneath the user name being 
displayed.)
Also, the user name should be registered using 1-byte characters. 
If multi-byte characters have already been used for the user name, create 
a new account with a user name consisting of only 1-byte characters.

-Notes on using the software with Windows XP Media Center Edition 2005 / 
Windows XP Media Center Edition 2004 / Windows XP Media Center Edition / 
Windows XP Professional / Windows XP Home Edition
When using ICD-BP series IC recorders with the computers with the 
standard-installed Windows XP Media Center Edition 2005 / Windows XP Media 
Center Edition 2004 / Windows XP Media Center Edition / Windows XP 
Professional / Windows XP Home Edition,and you connect the IC recorder to the 
USB port of your computer for the first time, 
[Found New Hardware Wizard] window is displayed. 
Select [Install the software automatically] and then click [Next]. Then the 
[Hardware Installation] warning message may appear. You may ignore the 
message without problem and click [Continue Anyway] to proceed with using the 
software.


-Notes while the IC recorder is being connected
While the computer is communicating with the IC recorder, avoid disconnecting 
the cable. Your computer may not work properly or the data inside the IC 
recorder may be damaged.
If a communication error occurs, the message "Could not communicate with IC 
recorder." is displayed and the communication process may terminate. If this 
occurs, disconnect and then connect the cable with the IC recorder.
If the message "Could not communicate with IC recorder." is displayed while 
connecting the IC recorder, check the following:

1 When using an external hub, connect the IC recorder directly to the computer.
2 Disconnect and then connect the cable with the IC recorder.
3 When your computer is equipped with multiple USB ports, connect the IC 
recorder to another USB port.

Depending on the type of the computer, you may not be able to start your 
computer when it is being connected to the IC recorder. If this occurs, 
change the boot sequence setting in the BIOS of your computer to start from 
the hard disk. Or disconnect the IC recorder and then restart your computer.
For how to change the BIOS settings, see the manual of your computer.

-Notes on system standby/hibernate mode
While the computer is communicating with the IC recorder, do not let your 
computer change to system standby/hibernate mode. Prevent settings that 
automatically make such changes.
If your computer enters into system standby/hibernate mode while being 
connected to the IC recorder, the computer may fail to communicate with the 
IC recorder immediately after system recovery. In this case, disconnect and 
then connect the IC recorder.

-Note on formatting
To format the IC recorder or the "Memory Stick", make sure to use the 
formatting function of the IC recorder. If you format it in your computer, 
the IC recorder is unable to recognize the contained data. In this case, 
use the IC recorder to format it again. For details, see the operating 
instructions of the IC recorder. The IC recorder ICD-BP series does not 
have the formatting function.

-Note on Using ICS files
"Digital Voice Editor" does not support ICS files for ICD-R100 IC recorders. 
To use these files, first convert them into WAV files using older 
"Digital Voice Editor Ver.1.x" software. Do not use older "Digital Voice Editor 
Ver.1.x" software for purposes other than converting ICS files.

-Note on the "Digital Voice Editor Ver.1.x" software
When you are not going to use an ICS file for IC recorder ICD-R100, remove 
the "Digital Voice Editor Ver.1.x" software.

-Note on the "Digital Voice Editor Ver.2.x" software
After installing "Digital Voice Editor," do not install older "Digital Voice 
Editor Ver.2.x" software. Doing so will cause "Digital Voice Editor" to 
function improperly.
Should you install older "Digital Voice Editor Ver.2.x" software after 
installation, uninstall the older software and install "Digital Voice Editor" 
again.

-Note on all the versions of the "Memory Stick Voice Editor" software
After installing the "Digital Voice Editor" software, do not install the 
"Memory Stick Voice Editor Ver. 1.0/1.1/1.2/2.0" software. The "Digital 
Voice Editor" will not work properly. With the "Digital Voice Editor" 
software, you can save or edit the messages in the "Memory Stick". In case 
you installed the "Memory Stick Voice Editor" software, remove the "Memory 
Stick Voice Editor", and then install the "Digital Voice Editor" software 
again.

-Note on sending e-mail
If a mailing software of receiver sets not to accept executable files, may 
not open a setup file of Player Plug-in.

-Note on the size of mail attachment files
Depending on the internet service provider that sends or receives an e-mail 
message, the size of attachment file(s) to an e-mail message is limited.
Before sending an e-mail message, make sure to check the total attachment 
file size.

-For IC Recorder users of the ICD-S series and ICD-MS500 series
Because recorded messages of the ICD-MX series and ICD-SXx7 series are
in a dedicated "msv (LPEC)" format, the ICD-S series and ICD-MS500 series
cannot play these messages. 
To enable playback, run the "Digital Voice Editor" and select 
"ICD-S series (*.msv)" or "ICD-MSxx series (*.msv)" under "Convert File Format" 
to convert the messages to the "msv (LPEC)" file format designed for 
the ICD-S/MS5xx series.

-Notice for customers using the ICD-MX series Memory Stick IC recorder 
A message you recorded with the ICD-MS1 is an MSV (ADPCM) file and cannot
be played back with an ICD-MX series IC recorder.
A message recorded in ST or STLP or SP or LP mode with an ICD-MX series IC 
recorder is an MSV (LPEC) file. You cannot play it back with an 
ICD-S/MS5xx/MS1.
To play one of these messages with your IC recorder, use the Digital Voice 
Editor to save the message, make the Codec setting to suit your IC recorder,
and then add it to your IC recorder.  

-Notice for customers using the ICD-MS/BM series Memory Stick IC recorder 
A message you recorded with the ICD-MS1 is an MSV (ADPCM) file and cannot
be played back with an ICD-BM series IC recorder.
A message recorded in SP or LP mode with an ICD-S/MS5xx/BM series IC 
recorder is an MSV (LPEC) file. You cannot play it back with an ICD-MS1.
A message recorded in the ST mode with an ICD-BM series IC recorder is an 
MSV (LPEC Stereo) file and cannot be played back with an ICD-S/MS5xx series
IC recorder.
To play one of these messages with your IC recorder, use the Digital Voice
Editor to save the message, make the Codec setting to suit your Memory Stick
IC recorder, and then add it to your IC recorder.  

For details, see the online help topic "Setting the file format for saving
or adding a message(Codec)".

You cannot use the following functions of the Digital Voice Editor for an 
MSV(ADPCM) file:
 -Changing the user name
 -Dividing or combining
 -Playback using a bookmark
 -Changing the priority setting (You can set it on the "Memory Stick.")

-Note on an MP3 file
The MP3 files that you can convert with the software are of 48/44.1/32/24/22/
16/11/8kHz stereo or monaural type. the software also supports a VBR (Variable 
Bit Rate) type MP3 file. (We do not guarantee that all types of VBR MP3 files 
operate correctly with the Digital Voice Editor.) For how to handle an MP3 
file, see the online help.

-Notes on sound volume adjustments
Depending on the type of your computer, the volume control may not function 
properly. In this case, use the Windows Volume Control to adjust the volume.
To display the Volume Control window, click [Start], then select [Programs]-
[Accessories]-[Entertainment]-[Volume Control].
If no sound is output after you cancel muting, check the muting check box in 
the Windows Volume Control window and then uncheck it again. The sound will 
be output.

-Notes on using two-bytes characters
On installing the software, we recommend you that you do not use two-bytes 
characters when you input the destination folder for installation.

On using the software, we recommend you that you do not use two-bytes 
characters when you input file names, message names, user names, etc.
Two-bytes characters may not be displayed properly on the software. Use 
of two-bytes characters may cause unstable operation also.

-Note on AutoSave function
The AutoSave function is only available with the ICD-MX/BM/SX/ST/P series IC
recorders and Memory Stick. If you are using an ICD-BP/S series IC recorder
connected to your computer, you cannot activate the AutoSave function. 

[System Requirements]
Your computer and system software must meet the following minimum
 requirements.

IBM PC/AT or compatible (You cannot use this software with Macintosh.)
   -CPU: 266MHz Pentium II processor or higher
   -RAM: 128MB or more
   -Hard disk space: 70MB or more depending on the size and number of
                       sound files you store.
   -CD-ROM drive
   -Port: USB port (supports USB (conventionally called USB 1.1))
   -Sound board: 
    Sound boards compatible with any of the following operating systems:
    Microsoft Windows XP Media Center Edition 2005
                           Windows XP Media Center Edition 2004
                           Windows XP Media Center Edition
                           Windows XP Professional
                           Windows XP Home Edition
                           Windows 2000 Professional
   -Display: High color (16bit) or more and 800x480 dots or more
   -OS: Microsoft Windows XP Media Center Edition 2005 (Service Pack 2 or later)
                  Windows XP Media Center Edition 2004 (Service Pack 2 or later)
                  Windows XP Media Center Edition (Service Pack 2 or later)
                  Windows XP Professional (Service Pack 2 or later)
                  Windows XP Home Edition (Service Pack 2 or later)
                  Windows 2000 Professional (Service Pack 4 or later)

Note
(Windows 95 / 98 / 98 Second Edition / Millennium Edition standard installation, 
and Windows NT are not supported.)
(Operations on all the computers of the above requirements are not always 
assured.)

[Trademarks]
-Memory Stick is a registered trademark of Sony Corporation.
-LPEC is a registered trademark of Sony Corporation.
-IBM and PC/AT are registered trademarks of International Business Machines
 Corporation.
-Microsoft and Windows are trademarks of Microsoft Corporation, registered in
 the U.S.A. and other countries.
 Copyright (C) 1995 Microsoft Corporation. All rights reserved.
 Portion Copyright (C) 1995 Microsoft Corporation
-Apple and Macintosh are trademarks of Apple Computer Inc., registered in the
 U.S.A. and other countries.
-Pentium is a registered trademark of Intel Corporation.
-Intel Core is a registered trademark of Intel Corporation.
-Nuance, the Nuance logo, and Dragon NaturallySpeaking are trademarks and/or 
 registered trademarks of Nuance Communications Inc., and/or its affiliates 
 in the United States and/or other countries.
-MPEG Layer-3 audio coding technology and patents licesed from Fraunhofer IIS 
 and Thomson. 
-Music Identification Technology and associated data will be supplied from
 the Gracenote(R). Gracenote MisicID is the industry standard for digital
 music identification for both CDs and individual music files. For details,
 see the following web site: www.gracenote.com
 Gracenote(R) is a registered trademark of the Gracenote, Inc. The Gracenote
 logo and logotype, and "Powered by Gracenote" logo are trademarks of the 
 Gracenote. For use of the Gracenote services, see the following web page:
 www.gracenote.com/corporate
All other trademarks and registered trademarks are trademarks or registered
 trademarks of their respective holders.
Furthermore, (TM) and (R) are not mentioned in each case in this document.


END-USER LICENSE AGREEMENT FOR SONY SOFTWARE
Digital Voice Editor for IC Recorder 

YOU SHOULD CAREFULLY READ THE FOLLOWING AGREEMENT BEFORE USING THIS DIGITAL 
VOICE EDITOR SOFTWARE AND ITS RELATED MATERIALS ("SONY SOFTWARE").  USING THE 
SONY SOFTWARE INDICATES YOUR ACCEPTANCE OF THE AGREEMENT.  IF YOU DO NOT AGREE 
WITH IT, YOU ARE NOT AUTHORIZED TO USE THE SONY SOFTWARE.  

IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal 
agreement between you and Sony Corporation. ("SONY"), the licensor of the SONY 
SOFTWARE.  This EULA covers the SONY SOFTWARE.  The SONY SOFTWARE includes 
computer software, whether stored on any media or downloaded from the 
designated site of SONY for SONY SOFTWARE users ("SONY Site"), the associated 
media, any printed materials, and any "on-line" or electronic documentation 
and all updates and upgrades thereto.  You may use the SONY SOFTWARE only with 
specific computer/computers and your SONY PORTABLE DEVICE.  
By installing, copying or otherwise using the SONY SOFTWARE, you agree to be bound by 
the terms of this EULA. If you do not agree to the terms of this EULA, SONY is unwilling to 
license the SONY SOFTWARE to you.  In such event, you should not use or copy 
the SONY SOFTWARE.

SONY SOFTWARE LICENSE 
The SONY SOFTWARE is protected by copyright laws and international copyright 
treaties, as well as other intellectual property laws and treaties.  The SONY 
SOFTWARE is licensed, not sold.

GRANT OF LICENSE.  This License grants you the following right:
Software.  You may install and use one copy of the SONY SOFTWARE on specific 
computer/computers.
Storage/Network Use. You may not use the SONY SOFTWARE over an internal 
network or distribute the SONY SOFTWARE to other computers over an internal 
network.
Back-up Copy.  You may make one back-up copy of the SONY SOFTWARE solely for 
archival purposes.

DESCRIPTION OF REQUIREMENTS, RESTRICTIONS, RIGHTS AND LIMITATIONS
Limitation on Reverse Engineering, Decompilation and Disassembly.  You may not 
modify, reverse engineer, decompile or disassemble the SONY SOFTWARE in whole 
or in part.  
Separation of Components.  The SONY SOFTWARE is licensed as single product.  
Its component parts may not be separated for use on more than specific 
computer/computers.
Specific COMPUTER.  The SONY SOFTWARE may only be used with specific 
computer/computers. 
Rental.  You may not rent or lease the SONY SOFTWARE.
Software Transfer.  You may permanently transfer all of your rights under this 
EULA only as part of a sale or transfer of the SONY SOFTWARE, provide you 
retain no copies, transfer all of the SONY SOFTWARE (including all copies, 
component parts, the media and printed materials, all versions and any 
upgrades of the SONY SOFTWARE and this EULA), and the recipient agrees to the 
terms of this EULA .
Termination.  Without prejudice to any other rights, SONY may terminate this 
EULA if you fail to comply with the terms and conditions of this EULA. In such 
event, you must destroy all copies of the SONY SOFTWARE and all of its 
component parts. 

Notice and Assistance.  You agree to reasonably notify and assist SONY in case 
you learn of illegitimate use of any violation of title or copyright with 
respect to the SONY SOFTWARE below.  Such notice may be directed either to the 
Sony Technical Response Center provided in the end of this EULA, or to the 
customer service link on the Sony Site.

COPYRIGHT
All title and copyright in and to the SONY SOFTWARE (including but limited to 
any images, photographs, animation, video, audio, music, text and "applets", 
incorporated into the SONY SOFTWARE), and any copies of the SONY SOFTWARE, are 
owned by SONY or its suppliers.  All rights not specifically granted under 
this EULA are reserved by SONY.

HIGH RISK ACTIVITIES
The SONY SOFTWARE is not fault-tolerant and is not designed, manufactured or 
intended for use or resale as on-line control equipment in hazardous 
environments requiring fail-safe performance, such as in the operation of 
nuclear facilities, aircraft navigation or communication systems, air traffic 
control, direct life support machines, or weapons systems, in which the 
failure of the SONY SOFTWARE could lead to death, personal injury, or severe 
physical or environmental damage ("High Risk Activities").  SONY and its 
suppliers specifically disclaim any express or implied warranty of fitness for 
High Risk Activities.

U.S. GOVERNMENT RESTRICTED RIGHTS
The SONY SOFTWARE and its related documents are provided with RESTRICTED 
RIGHTS.  Use, duplication, or disclosure by the United States Government is 
subject to restriction as set forth in subparagraph (c) (1) and (2) of the 
Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as 
applicable.  Manufacturer is Sony Corporation, 1-7-1 Konan, Minato-ku, 
Tokyo 108-0075, Japan.


LIMITED WARRANTY
LIMITED WARRANTY ON CD-ROM MEDIA.  SONY and its vendors warrants that for a 
period of ninety (90) days from the date of its delivery to you the CD-ROM 
media on which the SONY SOFTWARE is furnished to you will be free from defects 
in materials and workmanship under normal use.  This limited warranty extends 
only to you as the original licensee.  SONY and its vendors' entire liability 
and your exclusive remedy will be replacement of the CD-ROM media not meeting 
SONY's limited warranty and which is returned to SONY with proof of purchase 
in the form of a bill of sale (which is evidence that the CD-ROM media is 
within the warranty period).  SONY and its vendors will have no responsibility 
to replace a disk damaged by accident, abuse or misapplication. ANY IMPLIED 
WARRANTIES ON THE CD-ROM MEDIA, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION 
TO NINETY (90) DAYS FROM THE DATE OF DELIVERY.  SOME STATES DO NOT ALLOW 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THESE LIMITATIONS MAY 
NOT APPLY TO YOU.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.   

EXCLUSION OF WARRANTY ON SONY SOFTWARE
You expressly acknowledge and agree that use of the SONY SOFTWARE is at your 
sole risk.  The SONY SOFTWARE is provided "AS IS" and without warranty of any 
kind and SONY, its vendors, and SONY's licensors (hereinafter, SONY, its 
vendors and SONY's licensor's shall be collectively referred to as "SONY") 
EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.  SONY DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE 
SONY SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SONY 
SOFTWARE WILL BE CORRECTED.  FURTHERMORE, SONY DOES NOT WARRANT OR MAKE ANY 
REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SONY 
SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE.  NO 
ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED 
REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF 
THIS WARRANTY.  SHOULD THE SONY SOFTWARE PROVE DEFECTIVE YOU (AND NOT SONY OR 
A SONY AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY 
SERVICING, REPAIR OR CORRECTION.  SOME JURISDICTIONS DO NOT ALLOW THE 
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

LIMITATION OF LIABILITY
HEREINAFTER, SONY, ITS VENDORS AND SONY'S LICENSOR'S SHALL BE COLLECTIVELY 
REFERRED TO AS "SONY", SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF 
CONTRACT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY RELATED TO 
THE SONY SOFTWARE.  SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF 
PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY 
ASSOCIATED EQUIPMENT, DOWN TIME AND USER'S TIME, EVEN IF SONY HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGES.  IN ANY CASE, SONY'S ENTIRE LIABILITY 
UNDER ANY PROVISION OF THIS EULA SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID 
ALLOCABLE TO THE SONY SOFTWARE.  SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION 
OR LIMITATION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE EXCLUSION 
OR LIMITATION MAY NOT APPLY TO YOU.

COPYRIGHT
You agree to comply with all applicable copyright protection laws in 
connection with your use of the SONY PORTABLER DEVICE and SONY SOFTWARE.  In 
addition to the terms provided in this EULA, Sony Corporation and/or its 
affiliates may take appropriate measures to protect copyright of the contents 
played by the SONY SOFTWARE.  Sony Corporation reserves the right to amend 
this EULA at its sole discretion by indicating the amendment at the SONY Site 
or taking other appropriate measures.  

If you do not agree to the terms to be amended, which shall be notified to you 
by SONY before they take effect, you must return the SONY SOFTWARE with your 
SONY PORTABLE DEVICE and any other materials bundled in the package at the 
time of the purchase, together with any software you obtained from Sony Site 
for a pro-rated refund.  Your continued use of the SONY SOFTWARE after notice 
shall be deemed agreement to be bound by such EULA amendment.

SEVERABILITY
If any part of this EULA is held invalid or unenforceable, the other parts 
will remain valid.

Should you have any questions concerning this EULA or this limited warranty, 
you may contact SONY by writing to SONY at designated contact place printed in 
warranty card.


Copyright 1999-2007 Sony Corp.
